Please read the full Instructions for Use provided with the product prior to using.

Using the Bedwetting Alarm
1. Select which Mode you wish to use via the mode switch.
2. Attach the product to the child's upper arm. Insert the plastic hook into the small loop of the arm band. Adjust the tightness to ensure it fits snugly, but comfortably (not too tight).
3. Attach the sensor clip cord to the alarm connector by lining up the connection pin plastic tabs with the connector grooves and inserting the connection pin. Then turn the connection pin clockwise until it is tightly secured (i.e. you cannot pull the two cords apart).
4. Pass the cord under the child's pyjama top to avoid strangulation risk.
5. Open the sensor clip via the lever and attach it to the child's underwear/ pyjama pants (where urine is most likely). Ensure the sensor clip is closed firmly on the fabric and that the cord does not hinder the child's movement.
6. At the first sign of moisture, the alarm will sound and/or vibrate to wake the child. The LED indicator will flash blue.
7. As soon as the child wakes up (they may need assistance from you) turn off the alarm and unclip it from the child's underwear (you can teach the child to do this themselves). They should then go to the toilet and finish emptying their bladder.
8. Immediately clean and dry the product (to avoid corrosion of the sensor clip) as per Cleaning instructions and re-attach it to a clean dry pair of underwear or pyjama pants.